Steering Kit - Crossover by Steinjager - ('84 - '06 Wrangler TJ, Cherokee XJ)

$297.99

Model | TJ - 97-06

Finish | Bare

Quantity

- +

Steering Kit - Crossover by Steinjager - ('84 - '06 Wrangler TJ, Cherokee XJ)

$297.99

Model

TJ - 97-06

Finish

Bare

  • Product Description
      #XJ8401-TexturizedBlack

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Texturized Black. Made in the USA

      Model: XJ - 84-01

      Finish: Texturized Black

      #XJ8401-SouthwestBlue

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Southwest Blue. Made in the USA

      Model: XJ - 84-01

      Finish: Southwest Blue

      #XJ8401-SinbadPurple

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Sinbad Purple. Made in the USA

      Model: XJ - 84-01

      Finish: Sinbad Purple

      #XJ8401-RedBaron

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Red Baron. Made in the USA

      Model: XJ - 84-01

      Finish: Red Baron

      #XJ8401-PlayboyBlue

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Playboy Blue. Made in the USA

      Model: XJ - 84-01

      Finish: Playboy Blue

      #XJ8401-Pinky

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Pinky. Made in the USA

      Model: XJ - 84-01

      Finish: Pinky

      #XJ8401-NeonYellow

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Neon Yellow. Made in the USA

      Model: XJ - 84-01

      Finish: Neon Yellow

      #XJ8401-NeonGreen

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Neon Green. Made in the USA

      Model: XJ - 84-01

      Finish: Neon Green

      #XJ8401-MilitaryBeige

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Military Beige. Made in the USA

      Model: XJ - 84-01

      Finish: Military Beige

      #XJ8401-LocasGreen

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Locas Green. Made in the USA

      Model: XJ - 84-01

      Finish: Locas Green

      #XJ8401-LemonPeel

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Lemon Peel. Made in the USA

      Model: XJ - 84-01

      Finish: Lemon Peel

      #XJ8401-HotPink

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Hot Pink. Made in the USA

      Model: XJ - 84-01

      Finish: Hot Pink

      #XJ8401-GrayHammertone

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Gray Hammertone. Made in the USA

      Model: XJ - 84-01

      Finish: Gray Hammertone

      #XJ8401-GeckoGreen

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Gecko Green. Made in the USA

      Model: XJ - 84-01

      Finish: Gecko Green

      #XJ8401-FluorescentOrange

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Fluorescent Orange. Made in the USA

      Model: XJ - 84-01

      Finish: Fluorescent Orange

      #XJ8401-CloudWhite

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Cloud White. Made in the USA

      Model: XJ - 84-01

      Finish: Cloud White

      #XJ8401-Black

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Black. Made in the USA

      Model: XJ - 84-01

      Finish: Black

      #XJ8401-Bare

      NOTE: THESE ARE BARE METAL (ie: NOT powder coated). If you want a powder coated part, please refer to one of our many powder coated parts.

       

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep XJ 1984-2001, Crossover Steering Kit, Bare. Made in the USA

      Model: XJ - 84-01

      Finish: Bare

      #TJ9706-TexturizedBlack

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Texturized Black. Made in the USA

      Model: TJ - 97-06

      Finish: Texturized Black

      #TJ9706-SouthwestBlue

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Southwest Blue. Made in the USA

      Model: TJ - 97-06

      Finish: Southwest Blue

      #TJ9706-SinbadPurple

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Sinbad Purple. Made in the USA

      Model: TJ - 97-06

      Finish: Sinbad Purple

      #TJ9706-RedBaron

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Red Baron. Made in the USA

      Model: TJ - 97-06

      Finish: Red Baron

      #TJ9706-PlayboyBlue

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Playboy Blue. Made in the USA

      Model: TJ - 97-06

      Finish: Playboy Blue

      #TJ9706-Pinky

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Pinky. Made in the USA

      Model: TJ - 97-06

      Finish: Pinky

      #TJ9706-NeonYellow

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Neon Yellow. Made in the USA

      Model: TJ - 97-06

      Finish: Neon Yellow

      #TJ9706-NeonGreen

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Neon Green. Made in the USA

      Model: TJ - 97-06

      Finish: Neon Green

      #TJ9706-MilitaryBeige

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Military Beige. Made in the USA

      Model: TJ - 97-06

      Finish: Military Beige

      #TJ9706-LocasGreen

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Locas Green. Made in the USA

      Model: TJ - 97-06

      Finish: Locas Green

      #TJ9706-LemonPeel

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Lemon Peel. Made in the USA

      Model: TJ - 97-06

      Finish: Lemon Peel

      #TJ9706-HotPink

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Hot Pink. Made in the USA

      Model: TJ - 97-06

      Finish: Hot Pink

      #TJ9706-GrayHammertone

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Gray Hammertone. Made in the USA

      Model: TJ - 97-06

      Finish: Gray Hammertone

      #TJ9706-GeckoGreen

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Gecko Green. Made in the USA

      Model: TJ - 97-06

      Finish: Gecko Green

      #TJ9706-FluorescentOrange

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Fluorescent Orange. Made in the USA

      Model: TJ - 97-06

      Finish: Fluorescent Orange

      #TJ9706-CloudWhite

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Cloud White. Made in the USA

      Model: TJ - 97-06

      Finish: Cloud White

      #TJ9706-Black

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Black. Made in the USA

      Model: TJ - 97-06

      Finish: Black

      #TJ9706-Bare

      NOTE: THESE ARE BARE METAL (ie: NOT powder coated). If you want a powder coated part, please refer to one of our many powder coated parts.

       

      The Steinjager Crossover Steeing Kit is a drastic upgrade from the factory steering. It is manufactured from 1.50" x 0.25" wall DOM tubing and is paired with 3/4" Chrome Moly Rod Ends. This kit will work with or without the factory sway bar. Grade 8 hardware is included.

       

      Installation will require the spindles and pitman arm to be drilled out to 5/8".

      If you have more than a 4" lift, a drop pitman arm will be required.

      It is recommended that you either have 4.00" or less of backspacing or a minimum 16" rim. Factory 15" rims may rub the heim joints.

       

      Click HERE for install instructions.

      For Jeep TJ 1997-2006, Crossover Steering Kit, Bare. Made in the USA

      Model: TJ - 97-06

      Finish: Bare

      Prop65 Warning

  • Reviews
  • Product Details